Table of Contents
Advertisement
2
Setting Up the Chassis
3. Remove the drive from its protective wrapper and place it on an antistatic surface.
4. Record the drive model and serial numbers in your equipment log.
5. Set any jumpers or switches on the drive according to the drive manufacturer's instructions.
6. Using four screws of the appropriate size and length, attach two slide rails to the drive. Note
that the left and right rails mirror each other. The rails must be installed with the metal flange
with the screw holes to the front of the drive and the flap with the screw holes must point away
from the drive.
B
Intel® Entry Server Chassis SC5275-E User Guide
Figure 9. Slide Rails
TP00081
17
Advertisement
Table of Contents
