Virtual Server; Dmz Setting - Planet ADE-3400 User Manual

3.5.2.4 Virtual Server

Click Virtual Server in the left pane, the page shown in the following figure appears.
The following table describes the parameters of this page:
Field
Service Type
Protocol
WAN Setting
WAN Interface
WAN Port
LAN Open Port
LAN IP Address

3.5.2.5 DMZ Setting

Demilitarized Zone ( DMZ) is used to provi
unauthorized access to its local private network. Typically, the DMZ host contains devices
accessible to Internet traf fic, such as w eb (HTTP) servers, FTP servers, SMTP (e-mail)
servers and DNS servers.
Click DMZ Setting in the left pane, the page shown in the following figure appears.
The following describes how to configure DMZ.
Step 1 : Select Enable DMZ to enable this function.
Step 2 : Enter an IP address of the DMZ host.
Step 3 : Click Apply Changes to save the settings of this page temporarily.
Description
You can select the common service type, for example,
AUTH, DNS, or FTP. You can also define a service name.
 If you select Usual Service Name , the corresponding
parameter has the default settings.
 If you select User-defined Service Name , you need to
enter the corresponding parameters.
Choose the transport layer protoc ol that the service type
uses. You can choose TCP or UDP.
You can choose Interface or IP Address.
Choose the router port that uses virtual server.
Choose the access port on the WAN.
Enter the port number of the specified service type.
Enter the IP address of the virtual server . It is in the s ame
network segment with LAN IP address of the router.
de Internet services
38
without sacrificing