Table of Contents
Advertisement
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your AP. Some
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your
firewall software programs may block a DHCP request on newly installed adapters.
firewall software programs may block a DHCP request on newly installed adapters.
3.2 Starting Setup in the
It is easy to configure and manage the
t is easy to configure and manage the WBS-500N or WAP-500N with the web browser
Step 1.
To access the configuration page, open a web browser and enter
To access the configuration
http://192.168.1.253
After a moment, a login window will appear. Enter admin for the User Name and Password, both in lower case
After a moment, a login window will appear
letters. Then click the OK button or press the
Figure 3-4 Failed result of Ping command
Figure
the Web UI
in the web
web address field of the browser.
Figure 3-5 Login by default IP address
Figure
button or press the Enter key.
Figure 3-6 Login Window
User Manual of WAP
web browser.
for the User Name and Password, both in lower case
-22-
WAP-500N/WBS-500N
the default IP address
Advertisement
Table of Contents
