Command Line Interface; Accessing The Cli; Telnet Login - Planet MGSW-28240F User Manual

24-port 100/1000base-x sfp with 4-port 10g sfp+ managed metro ethernet switch

Hide thumbs Also See for MGSW-28240F:

Table of Contents

User's Manual of MGSW-28240F

5. COMMAND LINE INTERFACE

When accessing the management interface for the Managed Switch via a Telnet connection, the Managed Switch can be

managed by entering command keywords and parameters at the prompt. Using the Managed Switch's command-line interface

(CLI) is very similar to entering commands on a UNIX system.

This chapter describes how to use the Command Line Interface (CLI).

The Managed Switch supports telnet for remote management. The Managed Switch asks for user name and password for

remote login when using telnet, please use "admin" for username & password.