Chapter 4.Configuring The Ap; Operation Mode - Planet WAP-500N User Manual

This chapter instructs you how to quickly configure the AP/CPE in different operation modes.

4.1 Operation Mode

Go to the "System Operation Mode" page to configure the device in the operation mode which is suitable to
your application. Then go to "Wireless
mode.
The page includes the following settings:
Object
• Device Name
• Operation Mode
• Save & Apply
• Cancel
Chapter 4. Configuring the AP
Wireless Network" to configure the related wireless settings of each
Description
Enter a name for the device (1-32 characters). The name you type
appears in SNMP management. This name is not the SSID and is not
broadcast to other devices.
Select an operation mode for your application.
Click Save & Apply to save changes.
Click Cancel to cancel the unsaved changes and revert to the previous
settings.
-24-
User Manual of WAP-500N/WBS-500N