Stu-C (Cpe) Side; Console Configuration - Planet G.SHDSL Bridge/Router GRT-402 User Manual

PLANET Technology Corp.

STU-C (CPE) side

Follow the above instruction. The only difference in this configuration is that
users have to choose CPE SIDE instead of CO SIDE.
Setup the CPE Router in bridge mode. The gateway of CPE Router is pointed
to LAN IP, 192.168.0.1, of CO Router.

Console Configuration

Do the following steps in STU-R side:
1. User : admin
2. enable
3. setup
4. wan
5. lan address
6. (back to root) write
Do the following steps in STU-C side:
1.
2.
3.
4.
5.
6.
password: admin
supervisor password: root
mode Bridge
shdsl STU-R
Interface number (1~8) : 1
Protocol
vpi_vci: 0
encap:
192.168.0.1
255.255.255.0
y
User : admin password: admin
enable supervisor password: root
setup mode Bridge
shdsl
wan Interface number (1~8) : 1
Protocol
vpi_vci : 0
33
encap : LLC
lan address 192.168.0.2
255.255.255.0
(back to root) write
- - 21
GRT-101/401/402 User's Manual
: Ethernet
32
LLC
y
(reboot)
STU-C
: Ethernet
y
y (reboot)