How To Set Up The Camera Menu - FLIR DPV74TLUX Instruction Manual

Digital Video Security Systems

How to Set Up the Camera Menu

Use the camera menu to configure image quality and other camera settings.
To access the camera menu:
1. Use the included allen key to loosen the dome cover screws (3x) and remove the dome cover
from the camera.
OR Connect a UTC controller (Pelco C protocol) to the video cable and continue running the
cable to the DVR or monitor.
2. Press and hold the Set Up (middle) button to open the OSD menu.
• Press Up/Down to move the menu cursor up and down and select menu items.
• Press Left/Right to move the menu cursor left and right and adjust the selected menu
item.
• Press the Set Up button to open sub-menus or confirm selections.
3. When you are finished making changes to the menu, select Exit and press Set Up.
NOTE
• Arrow icon (
• You must Exit the OSD menu to save menu changes. Otherwise,
changes will not be saved if there is a power failure.
• To save changes, return to the main OSD menu, select EXIT, and press the Set Up
button. Or, in sub-menus, select SAVE&END and press Set Up to save changes
and exit the OSD menu.
) indicates sub-menu is available.
- 13 -
OSD
Joystick