Table of Contents
Advertisement
Digital Video Security Systems
» Gain: Press Left/Right to adjust the gain tolerance between 1~8. The
higher this value is, the brighter areas of the image will need to be for the
camera to block them.
» Mode: Press Left/Right to select ALL DAY for HSBLC to be enabled
in both day and night mode or NIGHT ONLY for HSBLC to be enabled
during night mode only.
» Default: Press Set Up to return to default HSBLC settings.
• D-WDR (Digital Wide Dynamic Range): D-WDR automatically adjusts
the light level in parts of the image to overcome strong backlight conditions.
» Off: Disable D-WDR.
» Indoor: Compensates for typical indoor lighting conditions. Press Set
Up to adjust the Low Level and High Level for D-WDR.
» Outdoor: Compensates for typical outdoor lighting conditions. Press Set
Up to adjust the Low Level and High Level for D-WDR.
D-WDR OFF
White Balance
Use the White Balance function to adjust the color of the image.
1. Press Up/Down to select White Bal.
SETUP
LENS
DC
EXPOSURE
WHITE BAL
ATW
DAY&NIGHT
COLOR
3DNR
ON
SPECIAL
ADJUST
RESET
EXIT
- 22 -
D-WDR ON
Advertisement
Table of Contents
