FLIR DPV74TLUX Instruction Manual page 30

Digital Video Security Systems
» SMART DZOOM: Smart DZoom automatically digitally zooms the
camera when there is motion detected in a certain area. Press Left/
Right to select ON to enable Smart DZoom or OFF to disable. Then
press Set Up to configure the following parameters:
» Range: Press Left/Right to apply 2x~5x digital zoom to the image.
» Position: Press Set Up and then press Left/Right/Up/Down to
adjust the zoom area. Press Set Up to confirm the area.
» Sensitivity: Press Left/Right to adjust the sensitivity of motion
detection for Smart DZoom.
» Time: Press Left/Right to adjust the time the camera will maintain the
zoom before zooming out.
» DIS (Digital Image Stabilizer): DIS compensates for unclear images
caused by windy conditions or vibrations in the installation area. Press
Left/Right to select ON to enable DIS or OFF to disable.
» Neg. Image: Press Left/Right to select ON to invert the colors in the
image (makes the image look like a photo negative). Or select OFF for a
normal image.
DIS OFF
- 29 -
DIS ON