Table of Contents
Advertisement
Digital Video Security Systems
NOTE
• Settings changed in the IR Smart menu are saved if you change Day &
Night to EXT or AUTO.
• EXT (Recommended): Camera uses the CdS sensor to detect lighting
conditions and automatically select between day and night mode. Press Set Up
to set the Start Delay and End Delay.
• Auto: Camera uses the internal sensor to detect lighting conditions and
select between day and night mode. Press Set Up to configure the following
parameters for auto day/night mode:
» Delay: Press Left/Right to select the delay time before the camera will
switch between day and night modes.
» D->N(AGC): Select the brightness value when the camera changes from
day mode to night mode.
» N->D(AGC): Select the brightness value when the camera changes from
night mode to day mode.
3DNR (3D-Digital Noise Reduction)
3DNR allows you to configure 3D-Digital Noise Reduction (3D-DNR). 3D-DNR reduces
noise in the image during night mode.
1. Press Up/Down to select 3DNR.
DAY&NIGHT AUTO
|
DELAY
IIII IIIIIIIIIIIIIIII
D → N(AGC)
|
IIIIIIII IIIIIIIIIIII
N → D(AGC)
|
IIIIIIIIII IIIIIIIIII
RETURN
SETUP
LENS
DC
EXPOSURE
WHITE BAL
ATW
DAY&NIGHT
COLOR
3DNR
ON
SPECIAL
ADJUST
RESET
EXIT
- 25 -
5
60
20
RET
Advertisement
Table of Contents
