How to Set Up the Camera Menu
Use the camera menu to configure image quality and other camera settings.
To access the camera menu:
1. Open the service compartment on the bottom of the camera.
OR Connect a UTC controller (Pelco C protocol) to the video cable and continue running the
cable to the DVR or monitor.
NOTE: Use the included allen key to lock/unlock the service compartment.
2. Press and hold the Set Up (middle) button to open the OSD menu.
• Press Up/Down to move the menu cursor up and down and select menu items.
• Press Left/Right to move the menu cursor left and right and adjust the selected menu
item.
• Press the Set Up button to open sub-menus or confirm selections.
3. When you are finished making changes to the menu, select Exit and press Set Up.
NOTE
• Arrow icon (
• You must Exit the OSD menu to save menu changes. Otherwise,
changes will not be saved if there is a power failure.
• To save changes, return to the main OSD menu, select EXIT, and press the Set Up
button. Or, in sub-menus, select SAVE&END and press Set Up to save changes
and exit the OSD menu.
) indicates sub-menu is available.
- 11 -