Adjust - FLIR DPV74TLUX Instruction Manual

Digital Video Security Systems
» Auto: Automatic defog settings. Press Set Up and then press Left/
Right to adjust the Detect Level. A higher level will increase the
compensation for heavier fog.
» Manual: Manual defog settings. Press Set Up to configure defog
settings.

Adjust

This function is needed to control the brightness of the monitor.
1. Press Up/Down to select Adjust and then press the Set Up button. Configure
the following:
• Sharpness: Press Left/Right to adjust the sharpness of the image, as
needed. Increasing sharpness will make the outlines of the image more distinct.
• Monitor: Press Left/Right to select one of the following, depending on the
type of monitor you have.
» LCD: Recommended if you are using an LCD monitor. Press Set Up to
configure the Gamma, Level, Blue Gain, and Red Gain.
» CRT: Recommended if you are using a CRT monitor. Press Set Up to
configure the Level, Blue Gain, and Red Gain.
» User: Custom monitor settings. Press Set Up to configure the Gamma,
Level, Blue Gain, and Red Gain.
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW
DAY&NIGHT COLOR
3DNR ON
SPECIAL
ADJUST
RESET
EXIT
ADJUST
SHARPNESS
IIIIIIIIII IIIIIIIIII
MONITOR
RETURN
- 32 -
|
25
LCD
RET