FLIR DPV74TLUX Instruction Manual page 24

Digital Video Security Systems
2. Press Left/Right to select the best White Balance mode for your installation:
• ATW (Auto-Trace White Balance): Use this mode when the color
temperature is between 1,800K to 10,500K.
• AWB (Auto White Balance): Because ATW may not work properly in
certain conditions, it is recommended to use this mode if one of the following
conditions is present in your installation:
» When there is a very high color temperature in the image (above 10,500K;
for example, clear sky or sunset).
» It is very dark.
» If the camera is pointed directly at fluorescent lighting or if there is a drastic
lighting change, the operation of white balance may become unstable.
• AWC-->SET: Place a white card in front of the camera lens and then press
the Set Up button to set the white balance setting. If the lighting condition
changes, you may need to re-adjust the white balance.
• Manual: Use the manual option to manually adjust the blue and red levels.
Press Set Up, then press Left/Right to adjust the Blue and Red levels.
MANUAL WB
|
BLUE
IIIIIIIIII IIIIIIIIII
RED
|
IIIIIIII IIIIIIIIIIII
RETURN
- 23 -
31
20
RET