Flush Mount - FLIR DPV74TLUX Instruction Manual

Digital Video Security Systems

Flush Mount

1. Cut a hole in the ceiling using the inside line of the included flush mounting
template. Drill holes as marked on the template.
2. Run the extension cables through the ceiling
and connect the camera termination cable
to the extension cable.
3. Connect the camera cable to the camera
termination cable inside the ceiling.
4. Use the included allen key to loosen the
dome cover screws (3x) and then remove
the dome cover.
5. Attach the camera module to the ceiling
using the tapping screw 4x25 (3x).
Go to "Adjusting the Camera" on page 11.
Cut along
inside line
Drill mounting
holes
Flush Mounting Template
- 9 -
Camera
Termination
Cable
Camera
Cable
Camera
Module
Tapping Screw
4x25 (3x)
Dome Cover