Table of Contents
Advertisement
Digital Video Security Systems
» Area: Press Left/Right to select privacy area 1~8.
» Area Display: Press Left/Right to select ON to enable the selected
area or select OFF to disable the selected area. To configure the area:
a. If ON is selected, press Set Up.
b. Press Left/Right/Up/Down to configure the corners of the
privacy area and then press Set Up to go to the next corner.
c. Press Left/Right/Up/Down to configure the position of the
privacy area and then press Set Up.
d. Press Set Up again to save the privacy area.
» Color: Press Left/Right to select color 0~15.
» Transparency: Press Left/Right to set the transparency of the motion
area between 0~3.
• Defect: Use the Defect setting to remove white spots (defects). The camera can
eliminate up to 256 points. Press Set Up and then configure the following.
» Senseup: Press Left/Right to set the level of defect elimination. 32x
is recommended.
» Diff: Press Left/Right to set the size of defects between 0~3.
» Start: Select Start and press Set Up to start defect correction.
• Defog: The Defog feature improves the picture of objects obscured by fog
or dust. Press Left/Right to select Manual or Auto to enable or OFF to
disable.
DEFOG OFF
PRIVACY
AREA
AREA DISPLAY
COLOR
IIIIIII
TRANSPAR
|
IIII
IIIIIIIIIIIIIIII
RETURN
- 31 -
4
ON
|
8
IIIIIIIIIIIII
3
RET
DEFOG ON
Advertisement
Table of Contents
