Function Display - Icom iC-M91D Instruction Manual

3
PANEL DESCRIPTION
Softkeys (Continued)
■
Navigation [
After holding down [MOB], or in the MOB or Waypoint list
screen, push this key to start navigating to the selected
position.
Compass [
Push to display the compass screen to show the vessel's
course heading, SOG (Speed Over Ground) and COG
(Course Over Ground).
Log [ ] (p. 58)
Push to enter "RCVD CALL LOG" in the DSC CALLS menu.
7
] (p. 72)
] (p. 74)

Function display

■
r t y u i
e
q w
!7
!6
!5
!4
!3
q BUSY/TRANSMIT INDICATOR (p. 14)
"BUSY" appears when receiving a signal or when the
➥
squelch opens.
"TX" appears while transmitting.
➥
"MONI" appears while the monitor function is activated.
➥
w POWER ICON (p. 14)
"HI" appears when high power is selected.
➥
"LOW" appears when low power is selected.
➥
e CHANNEL GROUP ICON (p. 13)
Shows which channel group is selected, a U.S.A. "USA,"
International "INT," ATIS "ATIS" or DSC "DSC", depending
on the transceiver version.
r CALL CHANNEL ICON (p. 12)
Appears when Call channel is selected.
o
!0
!1
!2