Inactivity Timer - Icom iC-M91D Instruction Manual

10
MENU SCREEN OPERATION
D

Inactivity Timer

Set the inactivity timer to between 1 and 10 minutes (in 1 minute
steps) or OFF for the "Not DSC Related" items, and to between
1 and 15 minutes or OFF for the "DSC Related" items. The count
down alarm sounds 10 seconds before the Inactive timer returns
the current screen to the normal operating screen.
When the "INACTIVITY TIMER" screen is displayed, push
q
[∫]/[√] to select "Not DSC Related" or "DSC Related," and
then push [ENTER].
Push [ ∫]/[√] to select the option, and then push [ENTER]
w
to set it.
• "✔" is displayed next to the selected option.
Push [EXIT] to exit the Menu screen.
e
• Push [CLEAR] or [BACK] to return to the previous screen.
• Not DSC Related
When the LCD displays a screen other than the normal opera-
tion screen, or one not related to the DSC, and no key opera-
tion occurs for this set period, the transceiver automatically
returns to the normal operating screen.
81
• DSC Related
When the LCD displays the screen related to the DSC, and no
key operation occurs for this set period except during distress
operation, the transceiver automatically returns to the normal
operating screen.
D Monitor
Select the desired Monitor switch action. See page 15 for
details (Monitor function).
Push
Hold
(Default: 10 min)
D Unit
Select either the Nautical Mile or Kilo-Meter format to display
the distance.
: The monitor function is activated by holding down
[VOL/SQL] for 1 second. The squelch opens
while holding down the key.
: The monitor function is activated by holding down
[VOL/SQL] for 1 second. The squelch stays open
until any key is pushed.
(Default: 15 min)