Dsc Operation; Dsc Address Id - Icom iC-M91D Instruction Manual

8

DSC OPERATION

DSC address ID

■
D Programming Individual ID
A total of 100 DSC address IDs can be programmed and as-
signed a name of up to 10 characters.
Enter "INDIVIDUAL ID" in the DSC SETTINGS menu.
q
➪ DSC Settings 
MENU
(Push [MENU])
Push [ADD].
w
• The "INDIVIDUAL ID" program screen is displayed.
Enter a desired individual ID in the following way:
e
• Select a desired number using [Ω]/[≈].
• Push [ENTER] to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENTER].
The first digit is specified as '0' for a Group ID.
The first two digits are '0' for any Coast station ID.
Repeat step e to enter all 9 digits.
r
21
➪ Individual ID
(Push [Y]/[Z], then push [ENTER].)
After entering the 9 digit code, push [ENTER] to set it.
t
• The ID name programming screen is displayed.
Enter a desired 10 digit ID name in the following way:
y
• Select a desired character using [∫]/[√]/[Ω]/[≈].
• Push [ENTER] to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENTER].
• Push [123] then [!$?] then [ABC] to select a character group.
After entering the ID name, push [
u
"FINISH," then push [ENTER] to program it.
• The "INDIVIDUAL ID" list screen is displayed.
Push [MENU] to exit the MENU screen.
i
∫]/[√]/[Ω]/[≈] to select