Transmitting A Group Call - Icom iC-M91D Instruction Manual

8
DSC OPERATION
Manual ACK:
Enter "INDIVIDUAL ACK" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU])
• When no Individual call has been received, "Individual ACK" item
will not be displayed.
Select a desired individual address or ID code to reply to,
w
using [Y]/[Z], then push [ENTER].
Perform steps e to u, as described in "Quick ACK:," be-
e
ginning on the previous page.
33
➪ Individual ACK
(Push [Y]/[Z], then push [ENTER].)
D

Transmitting a Group call

The Group call function allows you to transmit a DSC signal
to only a specific group.
Enter "GROUP CALL" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU]) (Push [Y]/[Z], then push [ENTER].)
Select the desired preprogrammed group address or
w
"Manual Input," using [Y]/[Z], then push [ENTER].
• The ID code for the Group call can be set first. (p. 22)
• When "Manual Input" is selected, set the 8 digit ID code for the
group you wish to call.
Select a desired intership channel using [
e
then push [ENTER].
• Intership channels are already preset into the transceiver in the
recommended order.
➪ Group Call
Y](CH)/[Z](CH),