Received Call Log - Icom iC-M91D Instruction Manual

D Receiving a Test Acknowledgement Call
When a Test Acknowledgement Call is received:
The alarm sounds for 2 minutes.
➥
"RCVD TEST ACK" pops up. The LCD backlight blinks for
➥
2 minutes.
Push [ALARM OFF] to stop the alarm and the blinking
q
backlight.
• If [ALARM OFF] is not pushed within 2 minutes, the next screen
may appear, depending on the received Category.
Push [EXIT] to return to the normal operating mode.
w
• The transceiver exits the DSC mode.
• " " continues to blink and the Call is stored in the Received
Call Log.

Received Call log

■
The transceiver automatically stores up to 50 distress mes-
sages and 50 other messages, and they can be used as a
supplement to your logbook.
• While in the normal operating mode, "
corner of the LCD when there is an unread message.
D Distress message
Push [LOG] to enter "RCVD CALL LOG" in the DSC CALLS
q
menu, or you can enter it through the Menu screen.
➪ DSC Calls
MENU
(Push [MENU]) (Push [Y]/[Z], then push [ENTER].)
Push [ p] or [q] to select "Distress," then push [ENTER].
w
• The Distress messages are stored in "Distress."
• " " appears when there are unread messages.
• " " appears when there are no unread messages.
• No icon appears when there are no messages.
8
DSC OPERATION
" blinks in the upper right
➪ Received Call Log
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
58