D Receiving A Test Call - Icom iC-M91D Instruction Manual

Vhf marine transceiver

Hide thumbs Also See for iC-M91D:

Table of Contents

DSC OPERATION

D Receiving a Test Call

When a Test Call is received:

➥ The alarm sounds for 2 minutes.

➥ "RCVD TEST CALL" pops up. The LCD backlight blinks for

2 minutes.

Push [ALARM OFF] to stop the alarm and the blinking

backlight.

• If [ALARM OFF] is not pushed within 2 minutes, the next screen

may appear, depending on the received Category.

Push a softkey to select your desired action.

[IGN]

➥ Push to ignore the Call and return to the normal operat-

ing mode.

• The transceiver exits the DSC mode.

• "

" continues to blink and the Call is stored in the Received

Call Log.

[INFO]

➥ Push to display the Received call information. (p. 58)

[ACK]

➥ Push to display the "TEST ACK" screen to reply to the

Call. (p. 38)

When "TEST ACK" is set to "Auto TX," the transceiver au-

tomatically replies to the Call. In that case, both the TX and

RX calls are stored in the Transmitted and Received Call

Logs.

Table of Contents

Do you have a question about the iC-M91D and is the answer not in the manual?