D Transmitting A Test Call - Icom iC-M91D Instruction Manual

D Transmitting a Test call
Testing on the exclusive DSC distress and safety calling chan-
nels should be avoided as much as possible. When testing on
a distress/safety channel is unavoidable, you should indicate
that these are test transmissions.
Normally the test call would require no further communica-
tions between the two stations involved.
Enter "TEST CALL" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU]) (Push [Y]/[Z], then push [ENTER].)
Select a desired preprogrammed individual address, or
w
"Manual Input," then push [ENTER].
• The ID code for the Individual call can be set first. (p. 21)
• When "Manual Input" is selected, set the 9 digit MMSI ID code for
the individual you wish to call.
➪ Test Call
About Manual Inputting:
Enter a desired address ID in the following way:
• Select a desired number using [Ω]/[≈].
• Push [ENTER] to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENTER].
• The first digit is specified as '0' for a Group ID. If a Group ID is
entered, an error beep sounds after pushing [FINISH].
• The first two digits are '0' for any Coast station ID.
A confirmation screen appears.
e
• Confirm the call contents.
8
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
36