Menu Screen Operation - Icom iC-M91D Instruction Manual

D Float 'n Flash
Float 'n Flash function detects that the transceiver has come
in contact with water. When the function activates, LCD back-
light, keys and trim start to blink to make it easy to find the
transceiver even at night or in a dark environment.
Function : Turn the Float 'n Flash function ON or OFF.
Auto OFF : Set the Auto OFF time period to between 0
and 30 seconds (in 10 second steps). After
taking the transceiver out of the water, the
LCD backlight keeps blinking during this set
period.
Cycle : Set the LCD backlight blinking cycle to 0.5, 1,
2 or 4 seconds. The LCD backlight turns ON
for 0.5 seconds, and then turns OFF for this
set time period.
Alarm : Select whether or not the alarm sounds while
the LCD backlight, keys and trim blink when
the Float 'n Flash function is activated.
(Default: ON)
(Default: 20 seconds)
(Default: 0.5 seconds)
(Default: OFF)

MENU SCREEN OPERATION

10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
82