Setting Favorite Channels; Scan Operation (Except For The Dutch Version); Starting A Scan - Icom iC-M91D Instruction Manual

6

SCAN OPERATION (Except for the Dutch version)

Setting Favorite channels

■
For more efficient scanning, add the desired channels as Fa-
vorite channels, or clear "
Channels that are not tagged will be skipped while scanning.
Favorite channels can be independently assigned to each
channel group (INT, USA, ATIS or DSC).
q Select the desired channel group. (p. 13)
w Select the desired channel to be set as a Favorite channel.
Push [ ] to set the displayed channel as a Favorite channel.
e
"
• " appears on the display.
To cancel the Favorite channel setting, repeat step
r
"
• " disappears.
Clearing (or setting) all tagged channels
✓
Hold down [] for 3 seconds (until a long beep changes to
2 short beeps) to clear all Favorite channel settings in the
selected channel group.
• Repeat above procedure to set all channels as Favorite channels.
[Example]: Starting a Normal scan.
19
for unwanted channels.
"
e.
Push
[SCAN]

Starting a scan

■
First, set the scan type (Priority or Normal scan) and scan re-
sume timer in the Menu screen. (p. 78)
Select the desired channel group. (p.
q
Set the Favorite channels, as described to the left.
w
Make sure the squelch is closed to start a scan.
e
Push [SCAN] to start a Priority or Normal scan.
r
• "SCAN 16" appears during a Priority scan; "SCAN" appears
during a Normal scan.
• When a signal is detected, the scan pauses until the signal
disappears, or resumes after pausing 5 seconds, depending
on the setting. (Channel 16 is still monitored during a Priority
scan.)
• Push [Y]/[Z] check the scanning Favorite channels, change
the scanning direction or manually resume the scan.
• A beep tone sounds and "16" blinks when a signal is received
on Channel 16 during a Priority scan.
To stop the scan, push [CLEAR] or repeat step
t
Scan starts.
13)
r.
When a signal is received.