Connecting To Your Camera On Pc - Lorex LNC216 SERIES Instruction Manual

Getting Started

2.4.2 CONNECTING TO YOUR CAMERA ON PC

NOTE: For PC system requirements, see "System Requirements" on page 42.
1. Install the L-View software from the CD or download it from
www.lorextechnology.com.
2. Double-click the L-View icon
Connecting to your camera over the local area network (LAN):
1. When L-View opens, it scans the local network for connected cameras. Connected
cameras are shown under Auto Search.
2. Double-click the camera under Auto Search or click and drag the camera to a
desired screen on the display grid to connect to the camera.
3. Enter the camera password. If this is the first time connecting to the camera, the
password is lorex. Click OK.
28
to run L-View.
Click and drag camera
to a display screen
Or, double-click
camera under
Auto Search