Table of Contents
Advertisement
the web access port.
To configure the admin user name and password used to login to Web Configure:
1. Under Username, enter the desired admin user name for the camera. The default is
admin.
2. Under Password, enter the desired admin password for the camera. By default, the
password field is left blank when logging in. Repeat the password under Password
confirm.
3. Click Save & Apply to apply the settings to the camera. Restart the camera by
disconnecting and reconnecting the power adapter or pressing the Reboot button
(see "Reboot" on page 194).
To configure the Web access port:
For added security, you may change the camera's web access port. Please note that if
you change the web access port, you must enter the camera's IP address, a colon (:), and
the camera's web access port when connecting to the camera's IP address on the local
192.168.0.101:80
network (e.g.
1. Under Web access port, enter the desired web access port. It must not be used by
any other device on your network. Note that L-View will automatically update the web
access port when connecting to Web Configure on the local network.
2. Click Save & Apply. Restart the camera by disconnecting and reconnecting the power
adapter or pressing the Reboot button (see "Reboot" on page 194).
NOTE: Your computer must be on the same network as the camera to use Web
Configure. You may change camera settings over the Internet using the iPhone®, iPad®,
or Android™ apps.
Configuring Camera Settings using a Web Browser
).
185
Advertisement
Table of Contents
