Connecting The Camera - Lorex E893AB Series Quick Start Manual

Connecting the camera

Connect the cameras and cables to your NVR using one of the following two setup methods.
1. Connect cameras directly to the NVR (recommended)
Connect the Ethernet cable to the camera and then connect the other end of the Ethernet cable
to the NVR's PoE ports. The camera may take a minute to power on after being connected.
Notes:
• The smart deterrence camera is only compatible with select NVRs. For a list of compatible
NVRs, visit lorex.com/compatibility.
• You must connect the camera to a supporting H.265 NVR to take advantage of H.265
compression. For instructions on enabling H.265 compression, visit lorex.com, and
search "How do I enable H.265 compression?".
Ethernet cable
Camera's Ethernet connector
NVR's PoE ports
12