Table of Contents
Advertisement
6. Under NAS access password, enter the admin password for your NAS device. See
your NAS device's instruction manual for details.
Click Save & Apply
7. Click Save & Apply to save your settings.
8. To check to see if NAS recording options are correct, click NAS Settings again and
then click NAS Info. This will allow you to see the recording and hard drive status of
your NAS device.
NOTE: Recordings will not appear on your NAS device until at least 5 minutes after you
configure NAS recording. This is because of the time it takes to package recordings and
transfer them to the NAS device.
Configuring Camera Settings using a Web Browser
Click to check NAS status
Enter
recording
folder
Enter NAS
device's admin
user name and
password
181
Advertisement
Table of Contents
