Table of Contents
Advertisement
Configuring Camera Settings using a Web Browser
• 60Hz light freq/50Hz light freq: If necessary, select 60Hz light freq or 50Hz light
freq to adjust the camera for the frequency of your indoor lighting. These settings
are not available when the camera is set to Oudoor video.
• Enable audio microphone/Disable audio microphone: Select Disable audio
microphone to disable the built-in microphone in the camera or select Enable audio
microphone to enable it.
• Enable time display/Disable time display: Select Disable time display to turn off
video time stamps or Enable time display to turn on video time stamps.
2. Click Save & Apply to apply the settings to the camera. You may need to reconnect to
the camera after making settings changes.
9.3.2 MOBILE VIDEO
Set streaming settings for connecting using a smart phone or tablet. Note that less
bandwidth is generally available when connecting to the camera over a mobile cellular
network than when connecting using broadband Internet.
To configure mobile streaming settings:
1. Under Mobile bandwidth, select your available mobile bandwidth. If you are primarily
connecting using WiFi, you may set this setting higher.
2. Select either Select resolution & frame rate automatically to have the camera
automatically select the resolution and frame rate based on available bandwidth or
select Use the following values to manually select the resolution and frame rate.
172
Advertisement
Table of Contents
