Table of Contents
Advertisement
5.6.2 VIDEO TAB (CONFIGURE GENERAL VIDEO SETTINGS)
The Video tab allows you to configure general video settings, such as color and
brightness settings.
Select Colored or
Black & White
Select Sharpness
Select Lighting
Select Indoor
Lighting Frequency
Flip camera image
To configure general video settings:
1. Right-click the camera in Camera List and click Video settings. Then, select the
Video tab.
2. Under Video Color, select Colored or Black & White.
3. Under Sharpness, select the sharpness of the image between 10 (highest) and 1
(lowest).
4. Under Place, select Outdoor if the area with the camera is brightly lit. Select Indoor
if you notice strip lines in the image or if the picture is too dark on the Outdoor video
setting. Select Indoor + Sunlight if the picture is too bright on the Indoor setting.
• If you select Indoor or Indoor + Sunlight, select 60Hz or 50Hz under Light Frequency
to adjust the camera for the frequency of your indoor lighting.
5. Under Video Flip, select Flip to flip the camera image vertically and horizontally or
select Normal for normal orientation.
6. Under Brightness, select the brightness of the image between 10 (highest) and
1 (lowest).
7. Under Low Light Sensitivity, set the camera's sensitivity in low light environments
between Very High (highest), High, and Normal (lowest).
L-View for Mac
Select Brightness
Select Low Light
Sensitivity
Enable/disable time
stamps
Enable/disable built-in
microphone
91
Advertisement
Table of Contents
