Table of Contents
Advertisement
Configuring Camera Settings using a Web Browser
is full, or select Stop recording to have the NAS device stop recording video when
the available space is full.
3. Under Use NAS IP Address, enter the local IP address of the NAS device. OR, click
NAS Scan to scan your network for connected NAS devices. Then, click the name of
your NAS device from the list to add the NAS name.
NOTE: NAS Scan only works with certain models of NAS devices. If your device does not
appear, enter the NAS IP address under Use NAS IP address.
4. Under Shared folder name, enter the folder on the NAS where you would like to save
recordings to. Enter the folder name in all lower case letters and no slashes. This
folder must be located in the main (root) folder of the NAS device and must allow
read/write access. For example, the folder
public/recording
the folder
5. Under NAS access account, enter the admin user name of your NAS device. See your
NAS device's instruction manual for details.
180
Scan for NAS device (only works
with certain NAS models)
public
is not an acceptable record folder.
is an acceptable record folder, but
Select Recording
option
Select Overwrite
settings
Enter local IP
of NAS device
Advertisement
Table of Contents
