Configuring Temperature Push Notifications And Temperature Units; (Fahrenheit Or Celsius) - Lorex LNC216 SERIES Instruction Manual

iPhone® App
2. Tap Alarm notification.
3. Under Motion, select ON to enable Push Alarm Notifications when motion is detected
using video motion detection or OFF to disable.
4. Under Motion Sensitivity, select the sensitivity for video motion detection push
notifications between 1 (lowest) and 10 (highest) and press OK.
5. Under PIR, select ON to enable Push Alarm Notifications when motion is detected
using the PIR motion sensor or OFF to disable.
6. Under Sound, select ON to enable Push Alarm Notifications when sound is detected
by the camera or OFF to disable. Under Sound Sensitivity, select a sensitivity for
Sound Push Alarm Notifications between 1 (lowest) and 10 (highest) and press OK.
7. Tap Update to save your settings.
6.4.4 CONFIGURING TEMPERATURE PUSH NOTIFICATIONS AND
TEMPERATURE UNITS (FAHRENHEIT OR CELSIUS)
Temperature Push Notifications can be set up to send you alerts if the temperature near
the camera goes higher or lower than the specified values. You can also select the
temperature unit that will be used by the system.
To configure temperature push notifications:
1. In Camera List, tap
102
Enable/disable push notifications for
video motion detection
Select sensitivity for video motion push notifications
Enable/disable push notifications for sound
Select sensitivity for sound push notifications
Enable/disable push notifications for PIR motion detection
Example of temperature
push notification
next to the camera.