Editing Camera Wired Network Settings; Editing Camera Wifi Network Settings - Lorex LNC216 SERIES Instruction Manual

7.4.9 EDITING CAMERA WIRED NETWORK SETTINGS

Configure the camera IP address when connected using Ethernet. Select DHCP or Fixed
IP.
To edit camera wired network settings:
1. In Camera List, tap
2. Tap Camera Settings.
3. Tap Network then Wired Network.
4. Select DHCP (recommended) to allow the camera to automatically obtain an IP
address from the router or Static to use fixed IP address settings. If you select Static,
configure your IP Address, Subnet mask, Default gateway, DNS1, and DNS2.
5. Tap Update to save your settings.

7.4.10 EDITING CAMERA WIFI NETWORK SETTINGS

Configure WiFi network settings for the camera.
To edit camera WiFi settings:
1. In Camera List, tap
2. Tap Camera Settings.
next to the camera you would like to edit.
next to the camera you would like to edit.
Select DHCP or Static
If Static, configure IP
address information
iPad® App
133