Configuring Temperature Push Notifications And Temperature Units; (Fahrenheit Or Celsius) - Lorex LNC216 SERIES Instruction Manual

Android™ App
2. Tap Alarm Notification.
3. Under Motion, tap to select ON to enable Push Alarm Notifications when motion is
detected using video motion detection or OFF to disable.
4. Under PIR, tap to select ON to enable Push Alarm Notifications when motion is
detected using the PIR motion sensor or OFF to disable.
5. Under Sound, tap to select ON to enable Push Alarm Notifications when sound is
detected by the camera or OFF to disable. Under Sound Sensitivity, select a
sensitivity for Sound Push Alarm Notifications between 1 (lowest) and 10 (highest).
6. Tap Update to save your settings.
8.4.8 CONFIGURING TEMPERATURE PUSH NOTIFICATIONS AND
TEMPERATURE UNITS (FAHRENHEIT OR CELSIUS)
Temperature Push Notifications can be set up to send you alerts if the temperature near
the camera goes higher or lower than the specified values. You can also select the
temperature unit that will be used by the system.
To configure temperature push notifications:
1. In Camera List, tap
154
Enable/disable push notifications for
video motion detection
Enable/disable push notifications for
sound
Select sensitivity for sound push notifications
Enable/disable push notifications for PIR
motion detection
next to the camera you would like to edit.