Lorex LNC216 SERIES Instruction Manual page 32

Getting Started
7. Under ID, press the QR code button (
back of the camera using the camera on the iPad. The CamID will automatically be
entered.
• OR: Manually enter the CamID printed on the camera.
NOTE: QR code setup is not compatible with the 1st generation iPad®. If you have a 1st
generation iPad®, manually enter the CamID printed on the camera into ID.
16
) and line up the QR code printed on the
Line up the QR code to the
middle using the iPad® camera
Press to scan the QR
code printed on the back
of the camera, OR
manually enter the
CamID printed on the
camera