Getting Started
2.4 CONNECTING TO YOUR CAMERA ON PC
Follow the steps below to get up and running with a PC.
2.4.1 BASIC SETUP
1. Connect the power adapter cable to the power adapter using the USB connector.
2. Connect the power adapter to a surge protector or power outlet. Connect the power
adapter cable to the DC/IN port on the camera. The camera LED's will begin flashing.
2
3. A: Connect an Ethernet cable (included) to the NET port on the camera and connect
the other end to an available LAN port (usually numbered 1~4) on your router (not
26
1
Power Adapter
Power Adapter Cable