Table of Contents
Advertisement
L-View 116 for PC
5. Under Mode, select Continuous recording to continuously record the camera from a
start date to an end date, or select Play only to display the camera on the selected
screen from a start date to an end date.
6. Under Play only/Continuous recording, configure a Start and End date and time for
your schedule.
7. Under Recording/Playing Conflict, select what you would like L-View to do if there is
already a camera playing on the selected screen when the recording schedule
begins. Select Record/Play as scheduled (recommended) to have the schedule
automatically remove any cameras shown on the screen when it starts. Select Give
up that scheduled recording/playing to cancel this schedule if there is already a
camera on the selected screen.
8. Click Save to save the schedule.
NOTE: To view recordings, click
Video on your PC" on page 76.
3.5.2 CONFIGURING A PERIODIC (REPEATING) RECORDING
SCHEDULE
A Periodic recording schedule displays a camera on the selected display screen and
records on a repeating schedule.
To configure a Periodic recording schedule:
ATTENTION: Your computer must be on, and L-View must be running to enable
scheduled recording to your computer hard drive. If your computer is off or on Sleep or
Hibernate mode, scheduled recording to your computer hard drive will not work.
1. Click
to open the Scheduling menu.
56
to open L-Play. See "L-Play: Playing Recorded
Advertisement
Table of Contents
