Cleaning And Disposal - Lorex LNC216 SERIES Instruction Manual

Wireless network camera
Hide thumbs Also See for LNC216 SERIES:
Table of Contents

Advertisement

11. CLEANING AND DISPOSAL

Clean camera with a slightly damp cloth or an anti-static cloth. Never use cleaning
agents or abrasive solvents.
• Do not clean any part of the product with cleaners with thinners or other solvents
and chemicals. This may cause permanent damage to the product which is not
covered by the warranty. When necessary, clean it with a damp cloth.
• Keep your camera and monitor away from hot, humid, or wet areas or strong sunlight
• Every effort has been made to ensure high standards of reliability for your video
monitor. However, if something does go wrong, please do not try to repair it yourself.
Contact customer service for assistance.
Disposal of the Device
At the end of the product lifecycle, you should not dispose of this
product with normal household waste, but take the product to a
collection point for the recycling of electrical and electronic equipment.
The symbol on the product, User's Guide, and/or box indicates this.
Some of the product materials can be re-used if you take them to a
recycling point. By reusing some parts or raw materials from used
products you make an important contribution to the protection of the
environment.
Please contact your local authorities in case you need more information on the collection
points in your area. Dispose of the battery pack in an environmentally-friendly manner
according to your local regulations.
Cleaning and Disposal
191

Advertisement

Table of Contents
loading

Table of Contents