Editing Camera Video Settings - Lorex LNC216 SERIES Instruction Manual

iPhone® App
2. Tap Stream Settings.
3. Under Bandwidth, select the bandwidth for your mobile connection. If you are mainly
connecting using WiFi, you may set this setting higher.
4. Under Auto, select ON to have the camera automatically select the resolution and
frame rate based on available bandwidth. Or, select OFF to manually select the
resolution and frame rate. If you select OFF, configure the following:
• Under Resolution, select the resolution that will be used when connecting to the
camera using a smart phone or tablet: 320x240, 480x360, 640x400, or 1024x768.
• Under Frame rate, select the frame rate that will be used when connecting to the
camera using a smart phone or tablet between 30fps (highest) and 1fps (lowest).
5. Under Microphone, select OFF to turn off audio streaming to your mobile device or
tap to select ON to turn on audio streaming to your mobile device.
6. Tap Update to save your settings.

6.4.6 EDITING CAMERA VIDEO SETTINGS

1. In Camera List, tap
2. Tap Video Settings.
104
Select Mobile Bandwidth
Enable/disable auto resolution and frame
rate adjustement
Select Resolution
Select Frame rate
Enable/disable audio streaming
next to the camera.