Clearing An Anti-Masking Message; Searching And Sorting/Filtering - Bosch IUI-MAP0001 User Manual

MAP Control Center
NOTICE!
The system displays events with the newest event being displayed first.
If your passcode authorizes the clearing of alarms and other events, press Clear Events. If you
cannot clear certain events because you do not have the necessary access rights, then the Not
Authorized screen appears on the control center. In this case, please notify your installer or
maintenance engineer. For more information about viewing event memory, refer to
Section 2.1.3 View Event Memory, page 10.
2.1.4

Clearing an Anti-masking Message

1.
2.
3.
2.2

Searching and Sorting/Filtering

Some functions in the MAP system user interface call for or require searching, sorting, or
filtering. Where these functions are possible, the Search and Sort/Filter (Table 2.1, Page 11)
buttons appear on the screen.
Button
Table 2.1 Search and Sort/Filter button descriptions
Bosch Security Systems, Inc.
Turn on the Motion Detector Test for the area in which the point is located (refer to
Section 2.8.6 Motion Detector Test, page 50 )
Remove the object masking the point and then trigger the point using motion.
Turn off the Motion Detector Test again. The anti-masking message is now cleared.
Description
Search: Shows the Alphanumeric Keypad screen (Figure 2.3, Page 12).
Sort/Filter: Shows a list of sort categories appropriate to the function, and
the A-Z and Z-A buttons.
A-Z: Sorts in alphabetical order.
Z-A: Sorts in reverse alphabetical order.
User guide
Operation | en 11
F.01U.168.328 | 03 | 2011.05