Table of Contents
Advertisement
44
en | Operation
Figure 2.74 View Version Information screen
2.8.3
Enable/Disable Device
Disabling a device effectively removes that device from the security system. The control panel
ignores all signals received from a disabled device. Only authorized users, such as installers or
security officers, can disable devices. For information on bypassing a device, refer to
Section 2.7.3 Bypass/Unbypass Device, page 37.
On the Service menu (Figure 2.63, Page 39), press Enable/Disable Device. The Enable/
Disable Device screen (Figure 2.75, Page 44) lists each device and its current state:
–
–
NOTICE!
The user can enable or disable a device only if the area containing the device is not armed.
Figure 2.75 Enable/Disable Device screen
To find a specific device in the list, the user can search or sort the list. Press the Search
button to show the Search Enable/Disable Devices screen (Figure 2.76, Page 45). Use the
numeric, alphabetic, and command keys to enter a device's name. The name appears in the
Search Enable/Disable Device field. Press the Enter button to start the search.
F.01U.168.328 | 03 | 2011.05
Disabled (
), or
Enabled (
).
User guide
MAP Control Center
Bosch Security Systems, Inc.
Advertisement
Table of Contents
