Manufacturer Authorization; Adjust Volume/Brightness - Bosch IUI-MAP0001 User Manual

MAP Control Center
Figure 2.95 Sort/Filter: Change/View Output State screen
2.8.9

Manufacturer Authorization

From the Service screen (Figure 2.65, Page 40), press Manufacturer Authorization. The
Manufacturer Authorization screen (Figure 2.96, Page 53) opens. The button displays a green
check mark or red "X" mark indicating whether or not the manufacturer user authorization is
set. Press the Manufacturer Authorization button to grant the security system manufacturer
access to the system. This authorization expires at the configured number of hours for which
the manufacturer authorization was set.
Figure 2.96 Manufacturer Authorization menu
2.8.10

Adjust Volume/Brightness

On the Service menu (Figure 2.65, Page 40), select Adjust Volume/Brightness. Use the
Adjust Volume/Brightness screen (Figure 2.97, Page 54) to set the volume and brightness:
1.
2.
3.
Bosch Security Systems, Inc.
Press Volume or Brightness.
Press the + or – button to increase or decrease the volume or brightness setting.
Press one of the button bar buttons to exit from the screen.
User guide
Operation | en 53
F.01U.168.328 | 03 | 2011.05