Add User - Bosch IUI-MAP0001 User Manual

18 en | Operation
2.5.1

Add User

NOTICE!
A Smartkey user must also be entered as a control center user. Refer to Section Add Smartkey
User, page 20.
A control center user is not required to be a Smartkey user. Refer to Section Add Control
Center User, page 22.
1.
Figure 2.13 Add User screen
Enter User ID
2.
Figure 2.14 Enter User ID screen
3.
F.01U.168.328 | 03 | 2011.05
From the Users menu (Figure 2.12, Page 17), press Add User. The Add User screen
(Figure 2.13, Page 18) opens.
From the Add User screen (Figure 2.13, Page 18), press Enter User ID.
The Enter User ID screen (Figure 2.14, Page 18) opens.
Press Enter User ID to enter a specific three-digit user ID, or press Request Next
Available User ID to have the system assign a user ID. When you select Enter User ID,
the Enter User ID telephone keypad display screen (Figure 2.15, Page 19) opens.
a. Press the numbered buttons on the keypad screen. Each number appears in the
Enter new user ID field. Press Clear to make corrections.
b. Press OK to enter the specific user ID.
User guide
MAP Control Center
Bosch Security Systems, Inc.