Bosch IUI-MAP0001 User Manual page 22

22 en | Operation
NOTICE!
If no Smartkey profiles are programmed, the message Attention - Use RPS to Add Smartkey
Configuration (Figure 2.22, Page 22) appears.
Figure 2.22 Attention – Use RPS to Add Smartkey Configuration
16. Press a button on the Select Smartkey Profile screen to select one of the Smartkey
Figure 2.23 Select Smartkey Profile screen
17. A
Add Control Center User
18. From the Add User screen (Figure 2.13, Page 18), press Add Control Center User. The
F.01U.168.328 | 03 | 2011.05
profiles; then press OK.
symbol appears on the Add Smartkey User button.
Add Control Center User screen (Figure 2.24, Page 23) opens.
User guide
MAP Control Center
Bosch Security Systems, Inc.