View Event Memory; Clear Event Memory; View Alarm Counter - Bosch IUI-MAP0001 User Manual

56 en | Operation
Figure 2.101 Event Memory screen
To view non-sensor events, such as arming, disarming, troubles, and tampers, refer to
Section 2.8.1 Event History, page 40.
2.10.1

View Event Memory

This function allows the user to view the system events stored in the control panel since the
event memory was last cleared.
On the Event Memory screen (Figure 2.101, Page 56), select View Event Memory. The touch
screen lists the system events (Figure 2.102, Page 56).
Figure 2.102 View Event Memory screen
Press Clear Events to delete the contents of the event memory.
2.10.2

Clear Event Memory

For more information about event memory, refer to Section 2.10.1 View Event Memory,
page 56.
From the Event Memory screen (Figure 2.101, Page 56), select Clear Event Memory. The
system deletes the contents of the event memory.
2.10.3

View Alarm Counter

This function allows the user to view the number of system alarms since the control center
was installed.
From the Event Memory screen (Figure 2.101, Page 56), press View Alarm Counter. The
touch screen shows the alarm counter value (Figure 2.103, Page 57).
F.01U.168.328 | 03 | 2011.05 User guide
MAP Control Center
Bosch Security Systems, Inc.