Table of Contents
Advertisement
MAP Control Center
Figure 2.11 Disarm Selected Areas screen
2.4.3
Disarm Control Panel Area
From the Disarm menu (Figure 2.9, Page 16), press the Disarm Control Panel Area button.
Usually, this button is the area where the control center is located, but it could be any area
designated as the local area. The button name is unique at each installation.
To disarm the control panel area, press the Control Panel Area button then press the Disarm
button. The lock icon on the Control Panel Area button changes to the unlocked position and
the area's disarmed status shows on the button.
2.5
Users
NOTICE!
The options to perform user-related operations are restricted by permission set/access
profile.
The Users menu allows the user to add (up to the maximum number of users allowed), delete
or edit a user's profile or to change a user's passcode. On the Main Menu (Figure 1.5, Page 8)
press Users, then select the user category from the on-screen buttons (Figure 2.12, Page 17).
Figure 2.12 Users menu
Bosch Security Systems, Inc.
User guide
Operation | en
17
F.01U.168.328 | 03 | 2011.05
Advertisement
Table of Contents
