Bosch IUI-MAP0001 User Manual page 49

MAP Control Center
The Print Test button is also available on this screen. When the Print Test button is selected
from the Walk Test Points Tested screen, the Print Walk Test screen (Figure 2.85, Page 49)
opens, showing two options.
–
–
Figure 2.85 Print Walk Test screen
Resume Walk Test
The Resume Walk Test button is active only when the user has logged off the control center
before all points were tested. Refer to Figure 2.86, Page 49.
Figure 2.86 Walk Test screen – all buttons active
Start Seismic Test
Figure 2.87 Seismic Test screen
Bosch Security Systems, Inc.
Print Tested Points
Print Untested Points
User guide
Operation | en 49
F.01U.168.328 | 03 | 2011.05