Chapter 8
Audible Alarms and UPS Conditions
Eaton 5115 Tower UPS (500–1400 VA) User's Guide
Troubleshooting
This section explains:
S
UPS alarms and conditions
S
How to silence an alarm
S
Site wiring fault (120V models only)
S
Service and support
The UPS has an audible alarm feature to alert you of potential power
problems. Use Table 10 to determine and resolve the UPS alarms and
conditions.
Indicator Legend
Unlit
Lit
Flashing
Silencing an Audible Alarm
Before silencing an alarm, check the alarm condition and perform the
applicable action to resolve the condition (see Table 10).
To silence the alarm for an existing fault, press the
status changes, the alarm beeps, overriding the previous alarm silencing.
The alarm does not silence if there is a UPS fault, low battery condition,
or if the battery needs to be replaced.
Figure 25. UPS Front Panel
S
05146640 Rev D www.eaton.com/powerquality
On/Off Button
Test/Alarm Reset Button
Power On Indicator (green)
On Battery Indicator (yellow)
Overload Indicator (red)
Service Indicator (red)
button. If UPS
51