Communication Options; Usb Port - Eaton 5115 User Manual

ADDITIONAL UPS FEATURES

Communication Options

36
Eaton 5115 Tower UPS (500–1400 VA) User's Guide
Table 1. DIP Switch Settings
Output Voltage Input Voltage Range
110V
120V*
Output Voltage Input Voltage Range
220V
230V*
240V
*
Default position
The UPS is equipped with a USB port and a DB-9 communication port.
Either the USB port or the DB-9 communication port may be used to
monitor the UPS; however, they cannot operate simultaneously.

USB Port

The UPS can communicate with a USB-compliant computer using
LanSafe Power Management Software (v5.0.1 or higher).
®
To establish communication between the UPS and a computer:
1. Connect the USB cable to the USB port on the UPS rear panel.
Connect the other end of the USB cable to the USB port on your
computer.
2. Install the LanSafe software and USB drivers according to the
instructions provided with the Software Suite CD.
120V Models
DIP Switch 1
99V-116V ON
108V–127V* OFF
230V Models
DIP Switch 1
198V–233V ON
207V–243V* OFF
216V–254V ON
USB Port
Figure 17. The USB Port
S 05146640 Rev D www.eaton.com/powerquality
DIP Switch 2
OFF or ON
OFF or ON
DIP Switch 2
OFF
OFF or ON
ON