OPERATION
Turning the UPS Off
Standby Mode
32
Eaton 5115 Tower UPS (500–1400 VA) User's Guide
NOTE Pressing the
button while the UPS is in Battery mode causes the UPS to shut
down immediately.
To turn off the UPS:
1.
Prepare your equipment for shutdown.
2.
Press and hold the
to Standby mode (if utility power is available) and removes power
from your equipment.
3.
Unplug the UPS from the power outlet.
If you do not unplug the UPS, it remains in Standby mode.
When the UPS is turned off and remains plugged into a power outlet,
the UPS is in Standby mode. All indicators are off, and power is not
available to your equipment. The battery recharges when necessary.
NOTE For 220–240V models, the output receptacles may remain electrically live (up to
110–120V). Unplug the UPS to ensure power is not available to the output receptacles.
button for two seconds. The UPS transfers
S
05146640 Rev D www.eaton.com/powerquality